Veteran-owned. Owner-operated. Customer-first.

Real.
People.
Matter.

YOUR HOME ISN'T A SALES QUOTA.
RPM is local, veteran-owned and owner-operated. You get practical recommendations, fair pricing and transparency from people who answer to their neighbors, not a corporate playbook.

Ryan Piemonte with Bogey and an RPM tool bag beside a sunflower
NO MYSTERY MATHPRICES
IN PUBLIC
See where the money goes.
INTRODUCTORY FIRST-REPAIR OFFER30% OFFthe qualifying published repair priceExact standard + discounted prices below
Start with trustFind the real causeTransparent pricingFinish with confidence

01 · Clear help for the whole home

Find the cause.
Solve it right.

Routine maintenance, a difficult intermittent failure, a major repair, or a complete replacement—RPM can take the problem from first symptom to finished solution. I will show you what I find, explain the practical options, and give you the price before you choose one.

01

Heating

Complete furnace diagnosis, repair, maintenance, and replacement support—from the first symptom to a proven solution.

02

Cooling

Complete AC diagnosis, repair, maintenance, and replacement support built around your home—not a sales quota.

03

Indoor air

Airflow, comfort, and filtration problems traced to the cause, with add-ons recommended only when they solve it.

04

Maintenance

Thorough seasonal testing that catches weak points, confirms safe operation, and keeps dependable equipment working.

05

Installation planning

Transparent full-system pricing now, followed by a home-specific scope and firm price before installation.

02 · Upfront pricing

The price—and the math behind it.

A price makes more sense when the scope is visible. RPM publishes common repair prices, exact member savings, installation planning prices, and the assumptions that can change a quote.

02A

Repair pricing

The introductory offer gives you the published RPM 360° price on your first qualifying repair. Active RPM 360° Protection members keep that price on published repairs. The clean, rounded prices run about 30–33% below standard, and the exact dollar saving is shown on every line.

STANDARDPUBLISHED FLAT RATE
versus
INTRODUCTORY FIRST REPAIR / RPM 360° MEMBERABOUT 30% OFF
Common serviceStandard priceIntro offer / RPM 360° priceYou save
Diagnostic visit — first 60 minutes$90$60$30
Additional diagnostic — each 30 minutes$80$55$25
Clean flame sensor$170$115$55
Dual run capacitor — up to 55 MFD$290$195$95
Two-pole contactor — up to 40 amps$320$220$100
Universal hot-surface ignitor$320$220$100
Clear standard condensate drain$240$165$75
PSC condenser fan motor — 1/3 to 1/2 HP$790$535$255

Prices effective August 12, 2026. Published repair prices include the normal part or material described, ordinary labor, startup testing, and cleanup for that exact scope. Diagnostic testing is separate unless the line says otherwise. If the proven failure or scope changes, work pauses and you see the revised choice first.

The introductory rate applies to the first qualifying published residential repair per household booked by February 12, 2027 during regular service hours. The $60 first-hour diagnostic is credited when a listed repair is completed during the same visit. Maximum launch savings are $500. Installation, replacement equipment, permits, work outside the published price book, and after-hours service are excluded. Offers cannot be combined.

02B

Full-system installation planning

Installation pricing is posted now so you can plan before scheduling opens. These are complete planning prices—not one-size-fits-all quotes or unexplained “starting at” prices. A home-specific price follows sizing, compatibility, access, code, and permit review.

Practical full system

$7,860

3-ton R-32 AC + matched coil + 80% AFUE / 80,000 BTU gas furnace

A like-for-like upflow plan for dependable single-stage heating and cooling.

Current online equipment average
$4,103
Estimated tax + freight
$407
Installation materials
$650
Skilled installation labor
$950
Permit allowance + haul-away
$250
RPM fixed gross margin
$1,500
Get a home-specific price →

High-efficiency heat

$8,860

3-ton R-32 AC + matched coil + 96% AFUE / 60,000 BTU gas furnace

Higher-efficiency heating with a standard PVC vent and condensate path included in the planning scope.

Current online equipment average
$4,713
Estimated tax + freight
$497
Installation + vent materials
$900
Skilled installation labor
$1,000
Permit allowance + haul-away
$250
RPM fixed gross margin
$1,500
Get a home-specific price →
What these prices assume

Like-for-like upflow replacement; a correctly sized 3-ton matched system; standard access; an ordinary line-set route; reusable existing ductwork, electrical, and gas service; no crane, asbestos, major code correction, or duct redesign. The 96% price includes a standard PVC vent and condensate path. The $250 permit line is an allowance and is adjusted to the actual municipality. Every scope or price change is shown before approval.

Equipment math checked August 12, 2026

Each equipment line is the average of three visible current online prices for comparable Goodman 3-ton R-32 matched systems. Online price, freight, availability, final equipment selection, and home conditions can change the home-specific quote.

WHY SHOW THE MARGIN?A price should explain itself.

RPM uses the same visible $1,500 gross margin in both systems instead of hiding a percentage markup. It helps keep the company available to stand behind the work—and lets you decide whether the full price makes sense.

02C

RPM vs. the other guys

No names. No cheap shots. These are upper-market planning ranges drawn from broad 2026 consumer cost guides—not claims about a specific contractor. RPM standard pricing sometimes sits inside a guide range. The difference is that you see the exact scope, price, and member saving before deciding.

Common serviceRPM standardIntro offer / RPM 360°The other guys*
Diagnostic visit$90$60, credited when a listed same-visit repair is completed$150–$250
Dual run capacitor$290$195$300–$400
Two-pole contactor$320$220$300–$450
Universal hot-surface ignitor$320$220$225–$300
PSC condenser fan motor$790$535$450–$1,000
RPMExact scope + exact saving

Every published price is visible before work, with no running-clock surprise.

THE OTHER GUYSUpper-market planning range

Useful context—not a quote or claim about any particular company.

*Ranges use the upper portion of broad current consumer guides to model higher-overhead, full-service pricing. Actual price depends on the system, part, access, timing, warranty status, and contractor. Sources: service calls and ignitors, capacitors, contactors, and fan motors.

30%OFF YOUR FIRST QUALIFYING REPAIR
STANDARD → RPM 360° PRICESEE THE EXACT SAVING ABOVE

03 · Introductory offer

Your first qualifying repair is about 30% less.

Use the published RPM 360° price on your first qualifying repair. That is about 30% off the standard flat rate, and the table above shows the exact price and saving for each listed repair. No hidden hourly calculation. No mystery coupon.

Claim the introductory offer Available through February 12, 2027. Applies to the first qualifying published residential repair per household during regular service hours. The $60 first-hour diagnostic is credited when a listed repair is completed during the same visit. Maximum savings are $500. Installation, equipment, permits, unpublished work, and after-hours service are excluded. Eligibility and price are confirmed before work. Cannot be combined with another offer.

04 · Keep the published savings

RPM 360° Protection.

The introductory offer covers one qualifying repair. RPM 360° Protection keeps the same customer-first pricing available with two seasonal visits, priority scheduling, and the published member price on repairs while the plan stays active.

ONE HOME · ONE SYSTEM$100per yearor $10/month
  • One spring cooling maintenance visit
  • One fall heating maintenance visit
  • About 30–33% off every published repair
  • $60 first-hour diagnostic, credited with a listed same-visit repair
  • Priority scheduling during regular hours
Ask about RPM 360° Choose $100 paid annually or $10 billed monthly ($120 over 12 months). The plan covers one residential heating-and-cooling system at one address. Additional systems are quoted separately. Installation, replacement equipment, permits, and work outside the published repair price book are quoted separately. The plan may be started before repair authorization; no waiting period applies.

05 · Direct accountability

Built to solve the whole problem.

Difficult diagnosis, complicated repair, complete replacement, airflow problem, or routine maintenance—I will dig into the work, find the cause, and give you a clear path forward.

I’m Ryan Piemonte, the owner and technician behind RPM. I will bring the technical judgment, preparation, and persistence to handle the job. I will show you what I found, explain what the options mean for your home, and give you the price before work begins.

Recommendations come from the system, the home, and your goals—not a corporate sales target. Repair and replacement are options to compare, not predetermined outcomes.

RPM is starting lean so more of what you pay goes toward the diagnosis, equipment, and skilled work inside your home. Starting lean changes the overhead—not the safety, preparation, or operating requirements needed to do the work correctly.

Growth can bring more trucks and more good people. It will not change the standard: controlled overhead, honest pricing, and customer-centric service delivered by accountable owner-operator technicians.

RPRyan Piemonte
Owner & HVAC technician

A calm next step

Tell me what your home needs.

RPM is building its local service list now. Tell me whether you need repair, maintenance, or replacement. I will reply with the next step and what it will take to solve it. Joining the list is not a service appointment or authorization to begin work.

(630) 318-0057
Request received.Thanks. Ryan will review your information and follow up directly.